|Home||Internet of Things||Aerospace||Apparel||Energy||Defense||Health Care||Logistics||Manufacturing||Retail|
Lightweight Relays Enable Small Drones to Read RFID Tags Indoors
MIT has developed an RFID system that would allow users to capture tag reads with a small drone carrying a virtual antenna array to forward data between tags and a reader.
Sep 06, 2017—
In recent years, RFID-enabled drones have been deployed to track inventory and assets in storage yards and other outdoor settings throughout the United States and worldwide. Indoor settings, however, pose some challenges. RFID readers can be heavy enough to require a large drone to carry them, while large drones are not always nimble or safe enough for indoor settings. But there is value in using drones indoors—at large warehouses and distribution centers, for instance—says Fadel Adib, an assistant professor at MIT and a principal investigator at MIT Media Lab.
For that reason, the MIT Media Lab had developed a UHF RFID tag-reading system known as RFly that keeps the RFID reader on the ground, while deploying relays to capture the reader's RF signal, forward it to tags and send responses from those tags back to the reader. The system enables small, lightweight drones to operate in a large environment, flying over tagged items to capture ID numbers and approximate the tags' locations within about a foot.
According to Adib, the MIT team attached an off-the-shelf UHF RFID reader onto a small drone, which crashed. A large drone would pose safety problems, he says. If an individual were working or dwelling in an indoor setting and were to be hit by a large drone, an injury could result. A smaller drone, on the other hand, would likely cause little damage.
Since the small drone could not support the RFID reader, the group needed to develop a different strategy. Adib says they considered using a relay that would act as a repeater. The relay, with a built-in RFID antenna, can receive a signal from the reader, then use the power from that signal, as well as the drone's built-in battery, to forward an interrogating signal that is received by passive RFID tags within its vicinity. (The relay consumes less than three percent of the drone's battery altogether, they found.) The tags respond, and the relay captures their IDs and forwards that information to the reader.
Login and post your comment!
Not a member?
Signup for an account now to access all of the features of RFIDJournal.com!
SEND IT YOUR WAY
RFID JOURNAL EVENTS
ASK THE EXPERTS
Simply enter a question for our experts.
TAKE THE POLL
|RFID Journal LIVE!||RFID in Health Care||LIVE! LatAm||LIVE! Brasil||LIVE! Europe||RFID Connect||Virtual Events||RFID Journal Awards||Webinars||Presentations|