Home Internet of Things Aerospace Apparel Energy Defense Health Care Logistics Manufacturing Retail

Lightweight Relays Enable Small Drones to Read RFID Tags Indoors

MIT has developed an RFID system that would allow users to capture tag reads with a small drone carrying a virtual antenna array to forward data between tags and a reader.
By Claire Swedberg
Sep 06, 2017

In recent years, RFID-enabled drones have been deployed to track inventory and assets in storage yards and other outdoor settings throughout the United States and worldwide. Indoor settings, however, pose some challenges. RFID readers can be heavy enough to require a large drone to carry them, while large drones are not always nimble or safe enough for indoor settings. But there is value in using drones indoors—at large warehouses and distribution centers, for instance—says Fadel Adib, an assistant professor at MIT and a principal investigator at MIT Media Lab.

For that reason, the MIT Media Lab had developed a UHF RFID tag-reading system known as RFly that keeps the RFID reader on the ground, while deploying relays to capture the reader's RF signal, forward it to tags and send responses from those tags back to the reader. The system enables small, lightweight drones to operate in a large environment, flying over tagged items to capture ID numbers and approximate the tags' locations within about a foot.

MIT researchers have developed a system that enables small, safe, aerial drones to read RFID tags in large warehouses at a distance of several meters.
With the development of RFly, Adib says, researchers sought an alternative to manual inventory-tracking processes by personnel in large warehouses. They first explored the basic technologies available. A drone could carry a bar-code scanner, but bar codes require a line of sight. A similar problem makes camera-based drones unrealistic, since stacked inventory would put some items out of a drone's view.

According to Adib, the MIT team attached an off-the-shelf UHF RFID reader onto a small drone, which crashed. A large drone would pose safety problems, he says. If an individual were working or dwelling in an indoor setting and were to be hit by a large drone, an injury could result. A smaller drone, on the other hand, would likely cause little damage.

Since the small drone could not support the RFID reader, the group needed to develop a different strategy. Adib says they considered using a relay that would act as a repeater. The relay, with a built-in RFID antenna, can receive a signal from the reader, then use the power from that signal, as well as the drone's built-in battery, to forward an interrogating signal that is received by passive RFID tags within its vicinity. (The relay consumes less than three percent of the drone's battery altogether, they found.) The tags respond, and the relay captures their IDs and forwards that information to the reader.

Login and post your comment!

Not a member?

Signup for an account now to access all of the features of RFIDJournal.com!

PREMIUM CONTENT
Case Studies Features Best Practices How-Tos
RFID JOURNAL EVENTS
Live Events Virtual Events Webinars
ASK THE EXPERTS
Simply enter a question for our experts.
TAKE THE POLL
JOIN THE CONVERSATION ON TWITTER
Loading
RFID Journal LIVE! RFID in Health Care LIVE! LatAm LIVE! Brasil LIVE! Europe RFID Connect Virtual Events RFID Journal Awards Webinars Presentations