Home Internet of Things Aerospace Apparel Energy Defense Health Care Logistics Manufacturing Retail

AMS Sees Potential Medical Applications for Its HF Data-logging RFID Chip

The semiconductor company says medical equipment providers are studying the SL13A IC for use in a device to track a patient's blood glucose levels.
By Claire Swedberg

For the diabetic application, a tag made with the SL13A chip would be integrated with a glucose sensor. The chip measures approximately 2 millimeters by 2 millimeters (0.08 inch by 0.08 inch) and is about 0.75 millimeter (0.03 inch) in thickness, though it could be thinned further for use with specific inlays. The glucose sensor, which would be powered by the passive tag when being read, would add to the size. Such an implantable device has yet to be developed, Alminde says, so it is unknown how big it would need to be, nor whether it would prove practical. However, he adds, the goal would be to design the glucose-measuring tag so that it could be implanted in a user just below the skin. The user could then launch a phone app to be used with the NFC technology, placing the phone against the area of the skin under which the tag was implanted. The interrogator would provide sufficient power, through its transmission, to prompt the chip to broadcast back its own unique identifier, along with the glucose level being measured at that time. This could make it possible for health-care providers to collect data regarding a particular patient without requiring a phone call or office visit with that individual. If someone wanted the tag to store a history of glucose levels even when not being interrogated, a battery would be required. To date, however, no medical device manufacturer has expressed an interest in developing a battery-powered version for implantation within a patient, Alminde indicates.

The needs of the cold chain market are very different, Alminde says. In this case, he explains, end users often already have a UHF RFID reader on hand and want the longer read range of a UHF transmission, and are thus less interested in the HF version. The tag can be larger than the HF model, and can incorporate temperature sensors or other devices, such as a moisture sensor. While the UHF model of the chip is being used or tested by several companies in the supply chain industry, some construction businesses are also testing the tag. For example, a UHF tag made with the SL900A chip could be placed within wet cement and, when interrogated, transmit data indicating whether the cement at that location had dried sufficiently for further construction to proceed. The tag's chip can make some calculations as well; for example, it can determine any change in an item's shelf life, based on the temperatures to which that product has been exposed, and thus transmit a new expiration date that could then be viewed on a handheld's screen. In addition, the SL900A chip can include alarm functionality, by which an alert would be sounded in the event that the reader interrogated a tag for which the temperature had exceeded acceptable limits. If sensor data is being collected and stored on the tag when that tag is not being interrogated, Alminde adds, a battery would be required.

What's more, the UHF version could be employed by the automotive industry, in order to track the temperatures of automotive components, or monitor tire pressure.

AMS is offering the SL13A IC in the form of an RFID chip with an integrated temperature sensor and 8 kilobits of EEPROM memory. Similarly, AMS offers the SL900A chip with an integrated temperature sensor and 9 kilobits of EEPROM. Either chip can operate in fully passive mode or BAP mode (1.5 volts or 3 volts). The SL13A version costs $2.59 apiece, while the SL900A is priced at $3.63 each.

The company also sells a demonstration kit consisting of a complete tag in the form of a printed circuit board with either the SL13A or SL900A chip, as well as a dipole antenna, a replaceable 3-volt coin battery and software to be loaded onto a handheld EPC Gen 2 UHF reader or an NFC-enabled phone, for use in capturing and storing sensor data. Both the SL900A demo kit and the SL13A demo kit are available at AMS' Web site for $55 apiece. According to Alminde, the company has already sold a large quantity of these kits.

Login and post your comment!

Not a member?

Signup for an account now to access all of the features of RFIDJournal.com!

PREMIUM CONTENT
Case Studies Features Best Practices How-Tos
RFID JOURNAL EVENTS
Live Events Virtual Events Webinars
ASK THE EXPERTS
Simply enter a question for our experts.
TAKE THE POLL
JOIN THE CONVERSATION ON TWITTER
Loading
RFID Journal LIVE! RFID in Health Care LIVE! LatAm LIVE! Brasil LIVE! Europe RFID Connect Virtual Events RFID Journal Awards Webinars Presentations