USDA Approves First UHF Tag for Animal Identification System
The agricultural department says an EPC Gen 2 RFID tag from Eriginate can serve as an alternative to low-frequency RFID tags for use with its National Animal Identification System.
Jan 07, 2010—The U.S. Department of Agriculture (USDA) has approved a passive ultrahigh-frequency (UHF) RFID tag for cattle tracking that will be used in conjunction with the agency's Animal Identification Number (AIN) system. To gain USDA approval for is eTattoo RFID tag, Kansas startup Eriginate, owned by animal-tracking technology firm Herdstar, submitted data regarding the tag, along with a 14-page application. The EPC Gen 2 tag can now be sold in the United States to members of the cattle industry as part of the AIN system, and will compete with existing low-frequency (LF) button tags currently employed by ranchers and cattle auction companies to help track the movements and health of cattle.
The USDA's National Animal Identification System (NAIS) is a voluntary program intended to allow the tracking of specific animals by assigning each animal a unique AIN. The goal of NAIS is to be able to quickly access a record of every location where a particular animal has lived, in the event that contaminated meat or a sick animal is detected. Each registered animal is assigned a 15-digit identification number. The first three digits—840—represent the country code of the United States, while the final 12 make up the unique number assigned to the animal. The tags used by NAIS participants need not include RFID technology, but could simply display the number printed on the front of a plastic ID tag or button. However, many are employing RFID-enabled tags to track the cattle as they move through the supply chain, typically with a handheld interrogator.
USDA APHIS Veterinary Services. Those manufacturers, he says, have sold approximately 6.5 million AIN tags with or without RFID capabilities over the past three years. Hammerschmidt estimates that 4 million of these tags may currently be in use, mostly in cattle (though other animals, such as horses, sheep or pigs, can also be tagged), representing about 5 percent of all American cattle.
In April 2008, the USDA issued a seven-point plan to help it achieve its goal of enrolling 70 percent of all cattle into the NAIS program by the end of 2009 (see USDA Pushes Plan to Move NAIS Forward).
The reason UHF technology has not been included in the NAIS system before, Hammerschmidt says, is that RFID tag vendors had not produced a UHF tag for use with the AIN system—that is, with the 15-digit ID number. "We are technology-neutral," he says of the USDA, as long as the technology complies with a recognized ISO standard. The eTattoo tag complies with ISO standard 18000-6C, and it has enough memory to store other information in addition to the 15-digit number, though it is presently intended only to store the AIN.
The eTattoo tag fills a need in the cattle industry for a tag with a long read range, says Doran Junek, a member of Eriginate's board of directors. The existing LF button ear tags have a read range of 4 to 12 inches, and can be read with either a handheld interrogator or a fixed reader if cattle move down a narrow chute in close proximity to that device. Interrogators can also be utilized in the dairy industry, capturing reads of the animals' tags as they are being milked. Moreover, USDA veterinarians use handheld readers to capture a tag's unique ID number as an animal receives a vaccination.
However, Hammerschmidt notes, some cattle owners and operators have requested technology with a longer read range. Junek, himself a cattle rancher, says the LF tags are simply inadequate if they require operators to slow the speed of moving cattle, or if readers are unable to capture ID numbers at all, because the animals are not close enough or pass by too quickly. Many cattle owners and operators are reticent to participate in the AIN program, he indicates, simply because they believe low-frequency tags do not work effectively. Junek describes the scenario of a Kansas cattle market at which approximately 7,000 head of cattle are moved daily. Capturing the ID number on each LF tag is impractical, he explains, since it takes about 10 seconds per animal to read each individual tag with a handheld interrogator. At that rate, with 360 reads per hour with no delays, the market could still not process its cattle in one day. "Low-frequency works in small herds and for small projects," Junek states, but large operations that move thousands of cattle daily require a UHF tag.
Login and post your comment!
Not a member?
Signup for an account now to access all of the features of RFIDJournal.com!
SEND IT YOUR WAY
RFID JOURNAL EVENTS
ASK THE EXPERTS
Simply enter a question for our experts.