Home Internet of Things Aerospace Apparel Energy Defense Health Care Logistics Manufacturing Retail

Access This Premium Content

Options To Access This Article:

What Subscribers Are Saying

  • "Probably the best investment I've ever made."
    Steve Meizlish, President & CEO, MeizCorp Services, Inc.
  • "I have found that RFID Journal provides an objective viewpoint of RFID. It you are looking for a resource that provides insights as to the application and implications of deploying RFID, RFID Journal will meet your needs, It gives you a broad perspective of RFID, beyond the retail supply chain."
    Mike O'Shea, Director of Corporate AutoID/RFID Strategies & Technologies, Kimberly-Clark Corp.
  • "No other source provides the consistent value-added insight that Mark Robert and his staff do. In a world dominated by press release after press release, RFID Journal is developing as the one place to go to make the most sense out of the present and future of RFID in commerce."
    Bob Hurley, Project Leader for RFID, Bayer HealthCare's Consumer Care Division
  • "RFID Journal is the one go-to source for information on the latest in RFID technology."
    Bruce Keim, Director, Hewlett-Packard
  • "RFID Journal is the only source I need to keep up to the minute with the happenings in the RFID world."
    Blair Hawley, VP of Supply Chain, Remington Products Company

The Object Is the Antenna

An antennaless tag turns any metal object into an RFID transponder.
By Mark Roberti
Jun 01, 2012—Researchers at the North Dakota State University (NDSU) Center for Nanoscale Science and Engineering (CNSE) have developed an antennaless RFID tag that essentially turns a metal object into the device's antenna. "I came up with the idea when I was working with the U.S. Department of the Navy, which wanted a thin tag that could go on metal," says Cherish Bauer-Reich, a research engineer at CNSE. "Most RFID tags used on metal have a spacer, but tags that stick up from the surface of an object being tracked are prone to being damaged or knocked off."

From left: Michael Reich, Cherish Bauer-Reich and Layne Berge with a prototype of their antennaless tag

The challenge was coming up with a tag that could lie flat on just about any metal object and remain readable. If the antenna of a conventional passive ultrahigh-frequency tag touches the metal surface of the object being tracked, the tag is hard to read. On nonmetal objects, the RF energy from a reader creates an electrical charge that is captured by a passive tag and used to reflect a signal. But when a tag is on a metal object, the RF energy creates an induced charge on the metal, negating the charge captured by the tag.

Rather than limiting the induced charge, which is the way most metal-mount tags work, Bauer-Reich came up with the idea of using it to power the chip. But she had to get the induced charge to flow into the RFID microchip. Her solution was to use magnetic material to force the charge through the chip. She designed a small metal loop that straddles a strip of magnetic material. When the object is zapped with energy from the reader, an electric field is created. The magnetic material helps capture the charge induced on the metal and diverts it into the loop, where it powers the chip.
A close-up view of the antennaless tag

Michael Reich, a senior research engineer at NDSU, helped choose and test a variety of special materials. The researchers decided to use off-the-shelf ferrites. Layne Berge, an undergraduate student, built and tested prototype tags. The team now has a working prototype, which uses an Alien Technology Higgs 3 RFID chip. The tag can be read on aluminum plates, coffee cans and electronic devices with metal cases, from distances of 3 to 6 feet. While this isn't as good as a conventional metal-mount tag with a spacer to keep the antenna away from the metal, Bauer-Reich believes that with further refinement—changing the properties of the magnetic material, for example—the team will be able to increase the tag's read range.

The patent-pending technology is available for licensing. "We're hoping to find companies that are interested in working with us to take the concept to the next level," she says. "The tag could be optimized for particular applications. For instance, the DOD is interested in tagging ordnance [military supplies]. A tag designed to work on ordnance could be optimized to get a longer read range."
To continue reading this article, please log in or choose a purchase option.

Option 1: Become a Premium Member.

One-year subscription, unlimited access to Premium Content: $189

Gain access to all of our premium content and receive 10% off RFID Reports and RFID Events!

Option 2: Purchase access to this specific article.

This article contains 503 words and 1 page. Purchase Price: $19.99

Upgrade now, and you'll get immediate access to:

  • Case Studies

    Our in-dept case-study articles show you, step by step, how early adopters assessed the business case for an application, piloted it and rolled out the technology.

    Free Sample: How Cognizant Cut Costs by Deploying RFID to Track IT Assets

  • Best Practices

    The best way to avoid pitfalls is to know what best practices early adopters have already established. Our best practices have helped hundreds of companies do just that.

  • How-To Articles

    Don’t waste time trying to figure out how to RFID-enable a forklift, or deciding whether to use fixed or mobile readers. Our how-to articles provide practical advice and reliable answers to many implementation questions.

  • Features

    These informative articles focus on adoption issues, standards and other important trends in the RFID industry.

    Free Sample: Europe Is Rolling Out RFID

  • Magazine Articles

    All RFID Journal Premium Subscribers receive our bimonthly RFID Journal print magazine at no extra cost, and also have access to the complete online archive of magazine articles from past years.

Become a member today!

RFID Journal LIVE! RFID in Health Care LIVE! LatAm LIVE! Brasil LIVE! Europe RFID Connect Virtual Events RFID Journal Awards Webinars Presentations
© Copyright 2002-2016 RFID Journal LLC.
Powered By: Haycco