|Home||Internet of Things||Aerospace||Apparel||Energy||Defense||Health Care||Logistics||Manufacturing||Retail|
Ask The Experts Forum
Are There Any Case Studies on the Use of RFID in an RF Environment?
I have seen that the application can be used in data centers. Where can I find information about RFID's potential interference to a cable TV head-end or hub site?
I am unaware of any deployments of radio frequency identification systems at a cable TV head-end or hub site. These sites receive television signals for processing and distribution over a cable TV network. My understanding, which is admittedly limited, is that these sites usually have several large C-band receive-only satellite TV dishes. "C-band" describes the portion of the electromagnetic spectrum in the microwave range of 4.0 GHz to 8.0 GHz. Passive RFID systems operate at much lower frequencies: 128 KHz, 13.56 MHz, and 860 MHz to 960 MHz. These systems should not be impacted by television signals. There are some active RFID systems that operate in the 5 GHz range, though, which would likely be negatively impacted.
If any of our readers have deployed an RFID system within a cable TV hub or similar facility, they are invited to report below what interference, if any, they experienced.
—Mark Roberti, Founder and Editor, RFID Journal
Login and post your comment!
Not a member?
Signup for an account now to access all of the features of RFIDJournal.com!
SEND IT YOUR WAY
RFID JOURNAL EVENTS
ASK THE EXPERTS
Simply enter a question for our experts.
TAKE THE POLL