Home Internet of Things Aerospace Apparel Energy Defense Health Care Logistics Manufacturing Retail

Ask The Experts Forum

BlogsAsk The Experts ForumHow Can I Test RFID Tags?

How Can I Test RFID Tags?

Posted By RFID Journal, 07.30.2013

Once a tag chip is designed, how can I test its operation?

—Name withheld

———

There are two essential elements to passive RFID transponders: the chip and the antenna. The chip is tested in the same way that all microchips are tested—there is special hardware that confirms whether gates and other components are operational. Typically, when an antenna is attached, a reader attempts to communicate with the tag. Sometimes, it writes a serial number to that tag, assuming the tags are preprogrammed. If the tag can successfully communicate with it, then it is properly functioning.

However, I suspect that you may be referring not to testing whether the tag operates, but rather how well it performs. Typically, companies design a new tag antenna and then place the tag within an anechoic chamber, which is intended to block out electromagnetic energy from exterior sources and absorb energy within the chamber, in order to prevent reflected energy from reaching the tag. A reader antenna or antenna is placed within the chamber to measure the strength of the signal from the tag; a stronger signal correlates to longer read distance and better performance. The tag is usually rotated in 5-degree increments, enabling testers to ascertain the tag's performance in various orientations to the reader antenna.

By comparing the results of these measurements within the anechoic chamber, you can determine a new tag design's expected performance. Some tags, of course, are built to work on objects containing water, or on a specific material, such as glass. Obviously, in such a case, you would need to test the tag design on a piece of glass to determine its performance characteristics.

Voyantic offers a product called Tagformance, which helps companies assess new tag designs (see Voyantic Helps Companies Put RFID Tags to the Test).

—Mark Roberti, Founder and Editor, RFID Journal

USER COMMENTS

Fabian Schenk 2013-09-24 08:09:16 AM
Hi, to obtain valuable informations on how a tag performs in different environments you can have a look at the “UHF Transponder survey 2013/2014” (UTPS) issued by the European EPC Competence Center. www.eecc.info http://www.rfidjournal.com/articles/view?10959 Most of the common UHF-RFID tags are included in this study. The EECC owns an EPCglobal certified anechoic chamber in which all the tests for the UTPS are performed. As a manufacturer of tags you have the opportunity to perform individual tests of your product in coorperation with our engineers. Don’t hesitate to contact us, if you have any specific questions regarding tag performance parameters. Best Regards, Fabian, EECC GmbH

Login and post your comment!

Not a member?

Signup for an account now to access all of the features of RFIDJournal.com!

Next Post
Can RFID Tags Be Read at Very Low Temper...
Previous Post
From Whom Can We Purchase ALE 1.1 Middle...
PREMIUM CONTENT
Case Studies Features Best Practices How-Tos
RFID JOURNAL EVENTS
Live Events Virtual Events Webinars
ASK THE EXPERTS
Simply enter a question for our experts.
TAKE THE POLL
JOIN THE CONVERSATION ON TWITTER
Loading
RFID Journal LIVE! RFID in Health Care LIVE! LatAm LIVE! Brasil LIVE! Europe RFID Connect Virtual Events RFID Journal Awards Webinars Presentations
© Copyright 2002-2016 RFID Journal LLC.
Powered By: Haycco