RFID JournalRFID Journal ESPAÑOLRFID Journal BRASILRFID Journal EVENTSRFID Journal AWARDSRFID CONNECT
Home Internet of Things Aerospace Apparel Energy Defense Health Care Logistics Manufacturing Retail

RFID News Roundup

RF Code announces new asset-management tamper-detection tabs; Metalcraft unveils RFID wristbands for waterparks, amphitheaters, outdoor events; HID Global adds RFID to Fargo direct-to-card printer line; SensMaster intros active RFID sensor tag for personnel safety applications; Washington clinic improves patient waiting times and workflow with Versus' RTLS technology; AIM creates AIM Europe to guide regional AIDC growth.
By Beth Bacheldor
Nov 28, 2013

The following are news announcements made during the past week by the following organizations: RF Code; Metalcraft; HID Global; SensMaster; Versus Technologies; AIM.

RF Code Announces New Asset-Management Tamper-Detection Tabs

RF Code's M174 tag, with loop (right), thumbscrew (center) and flag tamper tabs
RF Code has announced a new type of mounting tab with added security for tracking critical rack-mounted assets in data centers. Developed to be utilized in concert with the recently released M174 tag (see RFID News Roundup: RF Code Launches Smallest Active Asset-Management Tag), the new tab can be used to trigger a notification when tags are removed, replaced or altered. The tamper tabs—offered in a flag, loop or thumbscrew mounting design—feature a carbon fiber filament embedded in the tab's adhesive. Once the tamper tab is connected to an M174 tag, RF Code explains, the filament completes a tamper-detection circuit that—if subsequently broken—will cause the tag to immediately begin broadcasting a tamper alert status. After the tamper tab is applied to an asset, the circuit will be broken if the tag is cut, if the tag adhesive is peeled away from the asset or the tab itself, or it the M174 tag is pulled off the tamper tab by force. It takes approximately 8 pounds of force to pull the tag off the tab once it has been attached to an asset, the company reports, so normal movements of assets will not break the circuit or trigger tamper alerts. The tag key is a thumb-size piece of plastic inserted into tab slots on the M174 asset tag, to permit the connection and disconnection of mounting tabs (both tamper detecting and non-tamper detecting adhesive backed tabs are available). To connect or disconnect a tab, a user inserts the key into two small slots on the M174 tag and then depresses it. Once this is done, tamper and standard mounting tabs can then be easily connected or disconnected from the M174 tag. The M174 is RF Code's smallest RFID-enabled asset-tracking tag to date. The battery-powered 433 MHz tag offers improved data transmission for higher accuracy, and a selection of installation tabs for flexibility in mounting and reuse throughout its lifespan. The M174 is designed to work with RF Code's A740 Rack Locator and A750 Room Locator, each of which transmits an infrared pulse pattern containing a unique three-digit location code. The M174 integrates four infrared (IR) sensors to ensure clear signal reception from a locator, regardless of direction. The tag broadcasts its unique ID number and received location code using RF Code's patented communication protocol, with anti-collision technology for environments containing a high tag density. The M174 tag was engineered for reuse throughout its lifetime. Tamper tabs can be removed and replaced from the tag as needed, via the use of a tag key.

Metalcraft Unveils RFID Wristbands for Waterparks, Amphitheaters, Outdoor Events

Metalcraft RFID wristbands
Metalcraft has announced the availability of RFID wristbands designed for efficient access control at waterparks and outdoor events. The company's RFID wristbands feature full-color printing and a durable construction, and consist of specialized RFID inlays encapsulated in 0.009-inch-thick polypropylene material—which, the company reports, enables the wristbands to withstand all-day submersion in water, as well as exposure to suntan lotion and insect repellent. The wristbands are available in an ultrahigh frequency (UHF) 860 to 960 MHz version, with an Alien Technology Squiggle-SH inlay, a high-frequency (HF) 13.56 MHz version with either a Texas Instruments Mini Tag-it inlay or an inlay made with NXP Semiconductors' Mifare Ultralight chip. The label copy on the wristband can include block type, stylized type, logos or other designs, and the wristbands come in a standard size of 15.75 inches by 1.5 inches, in black, red, yellow, green and blue; the construction features a secure snap to prevent easy removal. Due to contrast required for the bar-code scanner, all bar codes are black, the company explains. Both the bar code and human-readable text are produced using high-resolution digital technology, and can be programmed into the RFID inlay as long as the information is in decimal or hexadecimal format. The programmed information can be locked, which prevents the RFID inlay from being rewritten. Metalcraft can encode up to 24 characters into the RFID inlay. If requested, the firm says it can encode information that differs from the bar-coded and human-readable data.

HID Global Adds RFID to Fargo Direct-to-Card Printer Line
HID Global, a provider of secure identity solutions, has announced an update to its Fargo Direct-to-Card (DTC) printer line, designed to allow small, medium and large private and government organizations to produce ID, access-control, payment and loyalty cards. The enhanced Fargo DTC printers now feature an embedded multi-technology iClass SE RFID encoder, which, according to HID Global, simplifies card technology migration and helps personalize large ID card batches, all from within the printer. The DTC portfolio also includes expanded inline personalization features that offer faster speeds and increased flexibility, the company reports, with an optional wireless accessory module that allows users to issue cards at any time, from anywhere. Specifically, Fargo DTC printers can be specified to include HID Global's iClass SE encoder, which enables all credential creation, encoding, personalization and management for large ID card batches to be performed inside the printer, in a single issuance step. According to HID Global, this reduces administrative burdens and hardware costs. Cards can be encoded with unique company or employee information, and programmed to work with a variety of physical access-control systems, anywhere in the world, depending on the permissions written onto the card. Users can streamline all card ordering, inventory management and issuance processes, while maintaining maximum flexibility, security and end-to-end operational control. The new printer line also feature faster print speeds, and can be used to produce 50 percent more cards in the same amount of time as the company's earlier DTC models, HID Global reports. What's more, the firm adds, the new models can deliver cards to users 50 percent more quickly than was previously possible. Cards can be produced from any location, at any time, when using HID Global's Asure ID card personalization software on a Microsoft Windows 8 Pro Tablet over a secure wireless network. An optional Wi-Fi accessory, connected to any Fargo DTC printer-encoder, eliminates the need for wall-mounted Ethernet jacks and cables, according to HID Global. The solution gives users a wide range of capabilities for secure, on-demand credential enrollment and printing in the field, including the flexibility to add bar codes, company logos and a wide variety of visually rich, full-color card personalization options. HID Global's latest Fargo DTC portfolio includes four printers; each printer features AES-256 data encryption support, can be specified with a built-in iClass SE encoder and can be used with HID Global's Wi-Fi accessory for mobile card enrollment and issuance. The portfolio includes the DTC1000Me monochrome printer, for creating black and white images for simple card personalization; the Fargo DTC1250e color printer; and the DTC4250e and DTC4500e professional-grade color printers, which offer increased security with optional locking card hoppers (DTC4500e) and printer password protection. In addition, HID Global notes, the DTC4250e and DTC4500e models include Ethernet connectivity and are field-upgradeable, simplifying equipment migration to higher levels of security through the use of holographic or fluorescent (UV) overlaminates and dual-sided printing, to include additional visual elements. The enhanced Fargo DTC printers are available now.

Login and post your comment!

Not a member?

Signup for an account now to access all of the features of RFIDJournal.com!

PREMIUM CONTENT
Case Studies Features Best Practices How-Tos
RFID JOURNAL EVENTS
ASK THE EXPERTS
Simply enter a question for our experts.
TAKE THE POLL
JOIN THE CONVERSATION ON TWITTER
Loading
RFID Journal LIVE! RFID in Health Care LIVE! LatAm LIVE! Brasil LIVE! Europe RFID Connect Virtual Events RFID Journal Awards Webinars Presentations
© Copyright 2002-2014 RFID Journal LLC.
Powered By: Haycco